This field is hidden when viewing the formTrustgrid CustomerThis field is hidden when viewing the formNodesReference DocumentsFrequently Asked Questions Customer Deployment Diagram for Two Nodes with One IP Interface Customer Deployment Diagram for Two Nodes with Two IP Interfaces Deployment Instructions for Two Nodes with One IP Interface Deployment Instructions for Two Nodes with Two IP Interfaces Site Name*Site CodeSite TypePrimarySecondary/DRTestAppliance Type* Hardware Appliances (Tower) Hardware Appliances (Server) VM Virtual Appliances See Requirements to install Virtual AppliancesInterfaces on Each Device* One Ethernet Two Ethernet First DeviceIP Interface #1IP Address*Subnet Mask*Default Gateway*ESXI VersionIP Interface #2IP AddressSubnet Mask (2nd Interface)Default Gateway (2nd Interface)Second DeviceIP Interface #1 – 2nd DeviceIP Address*Subnet Mask*Default Gateway*ESXI VersionIP Interface #2 – 2nd Device This will use the same network information from Interface #2 on the first device.IP AddressCluster IP AddressThe Cluster IP must be on the same network as the IP Interface #2 interface of each device, when two interfaces are used.Cluster IP Address* Host InformationServer1:PortServer2:PortServer3:PortServer4:PortServer5:PortOther CommentsTest hosts or any other info can be entered here.DNSDNS servers can be public or private but must be accessible from the 1st interface of the node.DNS 1*DNS 2* On Connectivity FailureIn the event of a connectivity failure at the primary data center, how should Q2 fail over to your secondary data center?Automated Failover / Automated Fail Back This setting will provide the same Automated Failover as described above, but fail back will happen automatically as soon as connectivity is restored. NOTE: Automated failover requires the ability for servers at the DR site to accept connections automatically and without manual approval Manual Failover This setting requires your IT team to contact your Network Team to manually failover between your data centers. DR TypeAutomated Failover / Automated Fail BackManual FailoverTechnical Contact InformationTrustgrid may contact this person if there are any issues or questions regarding the submitted information. Also, the OVA files will be sent to this address if the Virtual Appliance option was chosen.Contact Name*Phone NumberEmail Address*Shipping InfoMust be a physical addressCompany Name*ATTN*Shipping Information RecipientTrustgrid will send shipping information to this email address.Address* Street Address Address Line 2 City AlabamaAlaskaAmerican SamoaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaGuamHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaNorthern Mariana IslandsOhioOklahomaOregonPennsylvaniaPuerto RicoRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahU.S. Virgin IslandsVermontVirginiaWashingtonWest VirginiaWisconsinWyomingArmed Forces AmericasArmed Forces EuropeArmed Forces Pacific State ZIP Code SummaryPlease, make sure that the information entered is correct before submitting it. Do also save a snapshot of your data for future reference.{all_fields} Δ
