HiddenTrustgrid Customer HiddenNodes Reference DocumentsFrequently Asked Questions Customer Deployment Diagram for Two Nodes with One IP Interface Customer Deployment Diagram for Two Nodes with Two IP Interfaces Deployment Instructions for Two Nodes with One IP Interface Deployment Instructions for Two Nodes with Two IP Interfaces Site Name* Site TypePrimarySecondary/DRTestInterfaces on Each Device* One Ethernet Two Ethernet First DeviceIP Interface #1IP Address* Subnet Mask* Default Gateway* IP Interface #2IP Address Subnet Mask (2nd Interface) Default Gateway (2nd Interface) Second DeviceIP Interface #1 – 2nd DeviceIP Address* Subnet Mask* Default Gateway* IP Interface #2 – 2nd Device This will use the same network information from Interface #2 on the first device.IP Address Cluster IP AddressThe Cluster IP must be on the same network as the IP Interface #2 interface of each device, when two interfaces are used.Cluster IP Address* Host InformationServer1:Port Server2:Port Server3:Port Server4:Port Server5:Port Other CommentsTest hosts or any other info can be entered here.DNSDNS servers can be public or private but must be accessible from the 1st interface of the node.DNS 1* DNS 2* On Connectivity FailureIn the event of a connectivity failure at the primary data center, how should Q2 fail over to your secondary data center?Automated Failover / Automated Fail Back This setting will provide the same Automated Failover as described above, but fail back will happen automatically as soon as connectivity is restored. NOTE: Automated failover requires the ability for servers at the DR site to accept connections automatically and without manual approval Manual Failover This setting requires your IT team to contact the Q2 IOC to manually failover between your data centers. Automated Failover / Manual Fail Back This automates the failover between data centers. In the event of an internet or connectivity outage to your primary data center, the connection will fail over to the secondary data center within a few minutes without any action. In order to fail back to the primary data center, your IT team must contact the Q2 IOC. DR TypeAutomated Failover / Automated Fail BackManual FailoverAutomated Failover / Manual Fail BackTechnical Contact InformationTrustgrid may contact this person if there are any issues or questions regarding the submitted information.Contact Name* Phone Number Email Address* Shipping InfoCompany Name* ATTN* Shipping Information Recipient Trustgrid will send shipping information to this email address.Address* Street Address Address Line 2 City AlabamaAlaskaAmerican SamoaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaGuamHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaNorthern Mariana IslandsOhioOklahomaOregonPennsylvaniaPuerto RicoRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahU.S. Virgin IslandsVermontVirginiaWashingtonWest VirginiaWisconsinWyomingArmed Forces AmericasArmed Forces EuropeArmed Forces Pacific State ZIP Code SummaryPlease, make sure that the information entered is correct before submitting it. Do also save a snapshot of your data for future reference.{all_fields} Δ
