Alacriti - New Customer

This field is hidden when viewing the form

Trustgrid Customer

Frequently Asked Questions
Introduction to Trustgrid Deployment
High-level Deployment Timeline
Deployment Instructions for Two Nodes with One IP Interface
Deployment Instructions for Two Nodes with Two IP Interfaces
Technical Spec Sheet for Lanner NCA-1513

Financial Institution Name(Required)

Site Name(Required)

Site Type

Deployment Type(Required)

High Availability Pair (HA)

Deployment Type(Required)

Single Node

Device Type(Required)

Please see machine requirements in order to host virtual nodes by clicking HERE
By selecting this option, you agree to support/manage the physical hardware where these nodes reside.

Hypervisor

VMware

Hyper-V

Interfaces on Each Device

Interfaces on Each Device(Required)

One Ethernet

Two Ethernet

Disaster Recovery (DR)

In the event of a connectivity failure at the primary data center, how should Alacriti fail over to your secondary data center?

Automated Failover / Automated Fail Back
This setting will provide the same Automated Failover as described above, but fail back will happen automatically as soon as connectivity is restored.

NOTE: Automated failover requires the ability for servers at the DR site to accept connections automatically and without manual approval.

Manual Failover
This setting requires your IT team to contact the Q2 IOC to manually failover between your data centers.

Automated Failover / Manual Fail Back
This automates the failover between data centers. In the event of an internet or connectivity outage to your primary data center, the connection will fail over to the secondary data center within a few minutes without any action.

In order to fail back to the primary data center, your IT team must contact the Q2 IOC.

DR Type

Device Information

DNS

DNS servers can be public or private but must be accessible from the 1st interface of the node.

DNS 1(Required)

DNS 2(Required)

First Device

IP Interface #1

IP Address(Required)

Subnet Mask(Required)

Default Gateway(Required)

IP Interface #2

IP Address (2nd Interface)

Subnet Mask (2nd Interface)

Default Gateway (2nd Interface)

Second Device

IP Interface #1 – 2nd Device

IP Address(Required)

Subnet Mask(Required)

Default Gateway(Required)

IP Interface #2 – 2nd Device

This will use the same network information from Interface #2 on the first device.

IP Address (2nd Interface)

Subnet Mask (2nd Interface)

Default Gateway (2nd Interface)

Cluster IP Address

The Cluster IP must be on the same network as the IP Interface #2 interface of each device, when two interfaces are used.

Cluster IP Address(Required)